Measurements & Ordering The Right Size
Shoe sizes vary by style—they run long, short, wide or narrow. We test fit size 8.5 shoes, and sometimes recommend ordering a larger or smaller size. Look for this information on any product page. (e.g. Fit: Runs long, buy a half size down.)
If one foot is larger than the other, always fit the larger foot.
The letters "4A", "3A", “2A”, "B”, or "C" below the sizes refer to the width of the shoe. The following chart explains the various widths Arthur Beren carries:
|4A or SS
||= Extra Narrow
|2A or N
|B or M
||= Medium (Standard)
|C or D or W
| 2E or WW
||= Extra Wide
Get sized regularly by a professional, preferably using a Brannock device. It is important to measure the width of the foot and to take into consideration the type of arch you have.
Wear the right socks. Consider your plans and activities and wear the most breathable and absorbent socks or stockings for the occasion with the appropriate footwear. If going bare, keep clean and dry.
Check the construction. Look at the sole and heel of the shoe to see what kind of terrain the shoe is meant to handle. Also look inside to assess the lining and upper elements of the shoe, checking to see how they will address your needs. A leather lined shoe will generally last longer than one without lining, though the unlined shoe may be lighter and more appreciated in warmer climates.
Walk around. When trying on a new pair of shoes, always try on both pair and walk around a bit - always on a clean indoor surface of course. Flex your arch and toes to see if the shoes feel good while you move about. Try shoes on in the afternoon or evening. Feet swell to their largest as the day progresses, so you will get a better reading of your true size once your feet have warmed up to the day.
Allow some time to break in a great pair of leather shoes--the best ones are a little tight in the beginning. By doing it right you’ll have shoes that are molded to your feet perfectly. See the How To Care tab for advice on proper shoe maintenance.
If the upper of the shoe is made of elastic or an elastic-blend fabric the shoe should fit snugly and need no breaking in. Shoes should never squeeze or cramp your toes.
If your shoes are slightly too loose in the in-step, a toe pad can be added to create a better fit, preventing any unnecessary friction.
For more heel and arch support or extra cushioning, consider custom fitted orthotic inserts, or even some gel inserts to target the problem.
Fitting Questions? Please call 1-888-400-2623 or email 'firstname.lastname@example.org'
A former competitive ballroom dancer, Anyi Lu has always understood that shoes must fit, support, and flex naturally. She brings her experience and technical insight—along with a love of fashion and old-world craftsmanship—to the design of the shoes and sandals that bear her name. Each pair is made in Italy from premium leather; lightweight, ultra-flexible “sacchetto” construction makes them a joy to wear. Poron memory-foam insoles cushion your feet, and professional-quality support—usually found only in top-of-the-line dance shoes—ensures comfort while protecting back and joints.